Whether you’re installing it yourself or completing the job professionally, it’s a two-stage process.
The first stage involves the installation of the ground anchor assembly. This process can take up to 4 hours to complete, depending on your ground conditions. It’s then advised to allow the concrete to cure for a minimum of 72 hours prior to assembling the Mega Slam basketball hoop system.
The second stage of the installation takes approximately 2 hours, to complete the assembly of the Mega Slam Basketball Hoop system and fix it to the ground anchor.

Prices for installing a Mega Slam Hoop will vary depending on a number of factors.

Location, access, ground conditions and spoil removal will each effect the cost.

There is no specific skillset required to install the hoop, but appropriate digging machinery can make the job much easier.

For free-standing, in-ground systems, one (1) to two (2) adults are good for installing the concrete anchor that holds your system. 
Four (4) adults are recommended for installing the basketball system on top of the anchor. The ½-thick (25mm) glass backboards are extremely heavy, and require a lot of strength to lift and fix to the system.

Once your new Mega Slam Hoop is installed according to the detailed installation instructions, it’s Game On!

It is optimal to create a full 24 inches of space behind the post of our adjustable in-ground basketball systems to allow use of the height adjustment handle.  

If you’re in a position to follow the regular Instructions and dig a hole to fill with concrete, then an indoor hoop can be as simple as an outdoor installation.