Padel court surfaces
Padel needs a low, slow, repeatable bounce and a controlled slide, and only sand-filled artificial turf gives it. What to specify, what it sits on, what it costs as a share of a court, and why brushing is not optional.
Padel is the fastest-growing racket sport in Europe, and the surface is the part of a padel court most often specified by analogy with something else — a tennis court, a basketball court, an artificial lawn. It is none of those. The surface has to produce a low, slow, predictable bounce and let a player slide a little without gripping, and only one family of surfaces does that well.
If you have arrived here from a modular-tile court: interlocking sport tiles are not a padel surface. They are excellent for basketball and multi-sport hard-court play and wrong for padel, for reasons worth understanding before anyone specifies one.
What the game needs from a surface
A padel court is 20 × 10 m, enclosed, with the back walls in glass and the sides part glass and part mesh. Play is built around the ball coming off those walls, which means the bounce off the floor has to be low and repeatable. A fast, high-bouncing surface removes the wall rally that is the point of the game.
Three properties matter:
- Controlled ball rebound. Lower and slower than tennis.
- Controlled slide. Players slide into shots. A surface with too much grip causes ankle and knee injuries; too little and nobody can change direction.
- Drainage, because most European courts are outdoors or under a canopy rather than fully enclosed.
Sand-filled artificial turf is the standard
Almost every padel court in the world, including professional tour courts, uses short-pile artificial turf with a silica sand infill.
| Property | Typical specification |
|---|---|
| Fibre type | Monofilament or fibrillated polypropylene |
| Pile height | 12–15 mm |
| Sand infill | Rounded silica, roughly 15–18 kg per m² |
| Colour | Blue, terracotta or green |
| Surface cost | €12–20 per m² for the turf itself |
The sand does the work. It sits down in the pile, stabilises the fibres and produces both the slow bounce and the controlled slide. A turf of the right pile height with the wrong sand — too little, too angular, or the wrong grade — plays badly and wears out fast.
Fibrillated fibre (a slit film that fans out) holds sand more securely and is the more forgiving choice for a club with heavy use. Monofilament (individual strands) looks better for longer and is more common on premium and televised courts.
Blue is the most common colour choice because the yellow ball reads most clearly against it, which matters for players and matters more for anyone filming.
What the turf sits on
The base decides whether the court is any good, and it is the half nobody photographs.
Either reinforced concrete or porous asphalt, laid to a tight tolerance — padel is unforgiving of a base that is out of level, because a shallow puddle changes the bounce on one side of the court only. Two drainage approaches are both accepted: a slight fall across the slab to a channel, or a fully porous build-up that takes water down through it.
The base also carries the cage. The glass panels and posts need cast-in anchors set to the structure's own geometry, and those go in with the slab, not after. Reversing that order is expensive.
Cost, and what the surface is a share of
Costing the surface alone is straightforward. A 20 × 10 m court is 200 m², so at €12–20 per m² the turf is roughly €2,400–4,000, plus sand, plus installation.
Costing a court is a different question, because the structure dominates. A complete outdoor padel court in Europe — base, cage, glass, net, turf and lighting — typically lands between €20,000 and €40,000, of which the surface is well under a fifth. The glass and steel are the expensive parts.
That ratio is worth knowing, because it is the argument against saving money on the turf. A cheap surface on a €30,000 structure is a false economy that shows up within a season.
Maintenance — brushing is not optional
Padel turf needs more attention than a modular court, and the difference is brushing.
- Brush regularly to redistribute the sand. Play pushes infill toward the back of the court and out of the high-traffic lines; brushing puts it back. Club courts want this weekly.
- Top up the sand annually. It migrates and it is carried out on shoes.
- Keep it clear of leaves and moss. Organic matter holds water and, on a porous base, blinds the drainage.
- Expect to re-turf. Five to eight years at club intensity, longer on a domestic court.
Neglected sand distribution is the commonest complaint about a padel court that felt fine when new: the bounce becomes uneven across the court, and no amount of new balls fixes it.
Padel alongside other sports
Padel does not share a surface well. The sand infill that makes it play correctly makes it poor for basketball, netball or five-a-side, and the cage is fixed geometry rather than a line marking. If a site needs several sports, the honest answer is a padel court and a hard court, not one surface trying to be both — see the flooring guide for what a shared hard court can genuinely carry.
Where padel and a hard court share a site, put them side by side and share the fencing run and the lighting columns. That is where the saving is.
Before you specify
- Settle the base and its drainage strategy before choosing turf.
- Get the sand grade and quantity written into the specification, not left to the installer.
- Set the cage anchors with the slab.
- Ask about lighting at the same time — the columns share footings with the cage and the duct goes in with the base.
- Budget the brushing regime, in hours, before you commit to the court.
Talk to us about surfacing for a padel project, or use the 3D designer if what you are planning is a hard court.
Pogosto zastavljena vprašanja
Oglejte si vsa pogosta vprašanja →Še vprašanj? Prebrskajte celoten seznam pogostih vprašanj o košarkarskem igrišču